The name of Proton’s P3-21A was officially confirmed yesterday, and the date of its arrival has also been mentioned – the Prevé is set to be launched by Prime Minister Datuk Seri Najib Tun Razak on April 16.
Ahead of the car’s premiere, Proton invited the media to a preview and test drive session with the car yesterday in Putrajaya. Photography wasn’t allowed, so we don’t have photos of the Prevé aside from what you see here, which is a selection of highlight shots provided by Proton.
The test drive route was comprehensive enough though, spanning 157 km in total, with both the normally-aspirated IAFM and turbocharged CFE variants driven, so both Anthony and I gained a fair bit of input about the car, which you’ll read about later in the story, but first, other aspects about the Prevé.
Examining the proof a little closer
The Prevé is built on the P2 platform, which is currently used by the Exora. This makes the P2 platform the base in which all larger-sized Protons will be built on. It will also be used for the Exora replacement, code named P6-XXA, due about five years down the road. As for B-segment cars, Proton will be utilising the P1 platform, which is yet to be revealed.
At the preview, Proton revealed its plans in other cars, based on these two platforms – there’s the P3-22A, a hatchback that’s next on the list, as well as the P3-30A, P3-31A and P3-32A.
So, if you add in the Prevé and the P6-XXA to the list, you’ll get six cars in total. It’s unclear as to how the other four will shape up, but the streamline to have two platforms and six products will be achieved by 2014.
Meanwhile, the Prevé will enter the scene not as a Persona replacement, as earlier thought, but placed between the Inspira and the Persona, at least in the immediate term.
To ease segmentation and offer clear differentiation, the Persona will now only be available in its B-Line entry-level specification, ahead of its retirement from the Proton model lineup in about a year and a half from now. Meanwhile, the Inspira 1.8 litre variants will be dropped, though a 2.0 litre manual version is set to join the 2.0 litre CVT in the Inspira lineup.
The Prevé will come in three variant forms, with two engine permutations and three transmissions, and indicative prices are from RM62k to RM75k, as mentioned previously. The two engines are the IAFM+ and the CFE, both 1.6 litre powerplants, and a five-speed Getrag manual is joined by two Punch CVT variations, the VT2 and VT3.
The CFE, to be seen in the High-Line version, comes with a low-pressure turbocharger that delivers 138 hp at 5,000 rpm and 205 Nm between 2,000 – 4,000 rpm. The engine is mated to a seven-speed CVT Punch gearbox, the VT3, dubbed the ProTronic.
Figures include a 0-100 km/h time of 9.6 seconds and a maximum top speed of 200 km/h. As for fuel consumption, the CFE gets 8.2 litres per 100km. In all, the numbers that the 1.6 litre CFE generates is said to be similar to that of a 2.0 litre N/A engine.
As for the IAFM+, the mill equips the two M-Line versions of the car, one with the five-speed Getrag manual and the other, a six-speed CVT, in this case the VT2. A thing to note here: the engine and gearbox is the same as seen in the Saga FLX SE, but retuned for the Prevé (no output figures were given at the preview, but it should be the 108 hp as seen on the FLX). Even the accelerator pedal is tweaked to make the best out of the powertrain and drivetrain.
A quick aside on why there are two variations of the Punch CVT box. Essentially, the VT3 transmission is a derivative of the VT2 – both share the same package, but the VT3 is capable of higher maximum input torques (215 Nm as opposed to the VT2‘s 186 Nm).
Currently, the IAFM+ engine is tuned for Euro 4 emissions, and the CFE with CVT is good for Euro 5 emissions. Now, you may think that the Malaysian government has not enforced emission regulations, so why bother. Call it future-proofing, although everyone else has arrived earlier. Already, Thailand is on the verge of starting its eco-car program that gives all sorts of tax breaks to cars that have low fuel consumption and low CO2 emissions. Proton is looking at penetrating the Thai market, hence the readiness of more efficient offerings.
Indeed, Proton says that with this car, it has taken its standard operating procedures, shaken it and turned it on its head. Two notable processes, among many others, have been implemented: simultaneous engineering and early vendor involvement. Proton claims that it has already nipped many problems in the bud. It is something they desperately and urgently need to get right.
The point is, Proton has a different goal, and is no longer content with making cars that are just ‘good enough’ for Malaysians, but something with a far more global outreach. The term ‘domestic market’ to Proton now means the whole of ASEAN, specifically, Thailand and Indonesia. And this ‘rethinking’ starts with the Proton Prevé.
0 comments:
Post a Comment